CORN THRESHING MACHINE Installation and Purchasing Attentions:
First, level up the Corn Threshing Machine four foot pads. Make them steady and firm. Reduce the vibration.
Second, check whether the Corn Threshing Machine power line has firm connection, tight sealing and has the ground electrode if the corn thresher adopts motor as power supply.
Third, put the corncob continuously and evenly into the Corn Threshing Machine. Incontinuous feeding will affect the efficiency. Too large feeding quantity may cause machinery blocking and overloaded operation and even cause motor and machinery breakage.
Fourth, moisture content of the corncob should not be higher than 20%. Or it will not reach normal corn threshing effect.
Fifth, when the threshing work is finished, discharge the corncob completely first and then halt the Corn Threshing Machine no-load. Don’t halt the machine on-load.
What should we notice in selecting a Corn Threshing Machine? There are various types and models of Corn Threshing Machine, such as the shaft replaceable ones, the up-down structure ones, the left-right structure ones, the cheap ones, the expensive ones and so on. What kind of Corn Threshing Machine is the most suitable one for us? What problems should we notice?
First, pay attention to the material of the Corn Threshing Machine.
The upper cover thickness of the ordinary Corn Threshing Machine is 1.5mm, the weight is 85kg, the net rubber sheet length is 74cm, and the middle two rubber sheets are made of total iron.
The upper cover thickness of the thickened Corn Threshing Machine is 2.75mm, the weight is 114cm, the net rubber sheet length is 84cm, and the middle two rubber sheets are made of semi-rubber and semi-iron.
Second, pay attention to the husking shaft design of the Corn Threshing Machine.
Semi-rubber and semi-iron design doesn’t damage the corn and costs more than the total iron design. As for rubber, the rubber sheet punched by the tyre has better...