Describes the design characteristics of the sludge dryer for sludge

Describes the design characteristics of the sludge dryer for sludge

Design characteristics of the sludge dryer for the introduction of sludge, the sludge dryer at work, you should first consider the nature of the sludge, during optimization of process operations. We all know that sludge sticky large, easy to stick wall, easy to agglomerate, processing a large amount, but the smaller the particle size after drying the product materials, light weight and other characteristics, in the back of the drying process must be sludge drying with these situations. Based on these characteristics, the structural design of sludge dryer is necessary from the actual situation, the configuration must be taken into fast feeding device, located at the inlet to the spiral spin plates in sludge dryer, and have anti-sticking wall facilities, such as the activities of the grate plate. In addition, broken facilities, such as broken wheel, so be sure to think of broken chain. Finally, the sludge dryer lifting plate is very important, lifting edition in sludge drying machine, the back end, where the sludge into position when most of the water has evaporated, basically non-stick, no clumping, Jan the sludge spilled material plates alternately up and was like falling curtain material, full contact with hot air, will completely evaporate the remaining water from the sludge dryer finished the end of the discharge port. Throughout the structure, a lot of things have to think early for the smooth sludge drying sludge dryer, lay a solid foundation.
Design characteristics of the sludge dryer for the introduction of sludge, the sludge dryer at work, you should first consider the nature of the sludge, during optimization of process operations. We all know that sludge sticky large, easy to stick wall, easy to agglomerate, processing a large amount, but the smaller the particle size after drying the product materials, light weight and other characteristics, in the back of the drying process must be sludge drying with these situations. Based on these characteristics,...

Similar Essays