As a professional FEED MACHINERY manufacturer, we can also provide considerate solutions for your feed machinery operation attentions. Now we will introduce the operating attentions before feed machinery starting.
1. Connect the 380V power supply before feed machinery operation, then start the motor, and check whether the revolving direction keeps unanimous with the indicating arrow. If they are not unanimous, we can exchange the two splices at will, then they will become unanimous with the indicating arrow.
2. The soybean that will be peeled should not be too dry, if not, they will be easily broken. The moisture content should keep about 9%, or the broken rate will increase. In this case, we can damp the soybean s with water first. In winter, it needs about 4 hours for dampening and two hours in spring. Then the soybean can be processed by the feed machinery. This is quite important in feed machinery operation attentions.
3. Before processing, we should separate the soybean s by different species and granules. Then we use suitable size of screens, which can improve production efficiency and reduce broken rate.
4. After trial run of the feed machinery, if each part of the machine runs normally and without any noise, then we can begin the production.
As a professional FEED MACHINERY manufacturer, we can also provide considerate solutions for your feed machinery operation attentions. Now we will introduce the operating attentions before feed machinery starting.
Key Points for FEED MACHINERY Maintenance
Today, we will introduce some key points for feed machinery maintenance:
First, when the bearing has wear, we need to replace it with new one according to the original standard.
Second, when the hammer has serious wear, the included angle can become rounded and the front end will be worn. Then, we should adjust the hammer angle. To make the rotor balanced, we can change the four hammers simultaneously and install according to the original...