FIRST centrifugal oil filter filtration using methods of operation and characteristics of soybean oil
Centrifugal oil filter filtration soybean oil use
1 The machine pressed the hot crude oil added to 1-1.5% of hot salt water stir, its purpose is ① dephosphorization, because phosphorus on the human body will produce osteoporosis and other diseases, so the first national oil standard is phosphorus index limited content, H2O NaCl (salt) and phosphorus compounds react to form P produce heavy salt Na2P5O (sodium phosphate) and H2 ↑ (hydrogen) ② add salt to absorb moisture becomes so heavy fine particles.;
2. centrifugal oil filter power to close, then add salinization after crude oil, crude oil pipeline from the oil flow through the centrifuge bucket axial to the upper end of the hollow drum at the bottom of a small nylon discs, small round disk quickly crude oil evenly split on the inner wall of the drum, this time a powerful centrifugal force generated by high-speed rotation of the drum will be qualitatively different heavy liquid separation, 2-3 minutes, turn off the power after crude oil added, the drum gradually stopped automatically after absolutes outflow fine filter to achieve the purpose, after just 5-6 minutes, filtered 250-350 pounds per hour of oil.
3 centrifugal oil filter filter cleaning residue of soybean oil after work
? Within ① drum slag is a scum 800-1200 pounds clear, first outer tub cover is open, then open the barrel cover, every slag drum wall surrounding the scum to clean out, otherwise the drum will due to the incompleteness of slag produced emphasis resulting machine vibration generated when the filter again.
② outer barrel cleaning residue is cleared once 7-10 days after the same roof and within the outer barrel barrels shelters were opened, and then at the bottom of the barrel being small screws on the middle of the small disc removed, and then they hand vertical upward force can be made clear at the bottom of the barrel...