How to maintain the bearing rapeseed refined oil equipment:
Today we together discuss rapeseed refined oil equipment bearings, it is equivalent to the human body joint, the function of the bearing is small but it is the key, so in order to our production must be carried out on the bearing a good maintenance, said oil vendors would penguin machinery below small make up a personal point of view.
Usually bearing generally present heating phenomenon when they fail, the operator in the operation of the device it is important to pay special attention to the bearing temperature and the noise of the bearing parts, abnormal should be handled in a timely manner, the matching of the bearing cover and shaft tight, bearing and shaft fit too tight or too loose will lead bearing overheating.
But this kind of problem, the palm oil refining (http://www.palmmill.com/News/78.html) equipment is in operation, will be friction noise and obvious oscillation.Should remove the bearing.Finishing friction parts, and then reassemble as required.Rapeseed refined oil equipment within the bearing lubricating oil too much, too little or aging is caused by bearing overheating and the main reason for the damage, therefore, according to use for filling quantitatively lubricating oil in time, general lubrication to extend its service life.Rapeseed 1 refined oil equipment housings rugged, or motor rotor with different heart, small oil mill rotor can make the bearing under the impact of the additional load, causing bearing overheating.Appear this kind of circumstance, want to immediately stop troubleshooting, to avoid the damage of bearing early.
Master these, believe that the rapeseed oil refining equipment will bring you a lot of production and income!
Rapeseed refined oil equipment the journey of life is not plain sailing, it will also struggle at the crossroads, lu xun once said: "this no way ahead, just walk person many, also became road."That's right, along the way, who also don't know is...