The big reasons that could trigger the tough start off of raymond mill are during the following:
1. The lubricating grease used by the raymond mill is too sticky and its stiffness increases once the temperature of your atmosphere is low. When starting raymond mill, the rotation resistance of the movable jaw axle is huge, which bring about the start is tough.
2. The last halt of raymond mill will not evacuate the ores inside the grinding chamber according to your operation specification. When restarting raymond mill, considering the fact that there may be ores inside the grinding chamber, the crusher may have to sustain large load when it is actually begun, so that the start out will probably be difficult.
3. The V-belt is too loose to ensure that it is going to slide through the transmission procedure, which will trigger considerably reduction of the electrical power when starting the electromotor.
4. The bearing of movable jaw as well as axial bearing of your rack of raymond mill are as well a great deal abraded, which cause the bearing roller to stagnate during the rotation approach of your movable jaw.
When the raymond mill is hard to start out, the gurus of SBM Machinery suggest that the consumers need to get the following responding precautionary measures in accordance to unique causes:
1. Pick out the lubricating grease with proper stickiness for lubrication.
2. In advance of stopping raymond mill , let it run with out supplies in it for some time to entirely discharge the components from the grinding chamber.
3. Timely modify the tightness with the V-belt.
4. Intensity the daily servicing of raymond mill and make sure that this gear is in the goo ailment. Power the efforts of supervision and examination and when there is some thing abnormal, timely report and cope with it.