If the centrifugal oil filter drum unbalance vibration, we have to how to solve it?
How to check the centrifugal oil filter produces vibration causes and solutions
Centrifugal oil filter using cylinder compression molding, through internal and external circular grinding clean-up by centripetal force to balance the axial movement of the centrifugal force, so that high-speed rotation of the drum balance problems are resolved, so that the machine smooth operation, high safety performance, using precision sealed device, so that even twist and motor
Use of safety devices, so that when the swivel piece without departing from the motor speed rotation. Thoughtful and careful design of the machine smooth operation, high safety performance, the filter is better than the other belong to the same product can be said that the oil filter oil filter equipment in the end product.
? If the centrifugal oil filter drum imbalance, vibration, so when crude oil filtration force due to vibration of the drum of crude oil to produce resonance, quality is more important phospholipids hydrate can not be bonded to the tank wall, even if the filter long time to no avail, and finally phospholipids or mixed in oil. Vibration is a great hazard: to cause vibration, noise generated, accelerated wear of bearings, shorten the mechanical life, serious accidents can be devastating. Here to introduce you to the reasons and solutions centrifugal oil filter which produces:
One reason: the foot screws loose. Workaround: Tighten loose screws can operate.
Two reasons: diesel uneven or excessive thickness. Solution: The clean diesel failure can be ruled out.
Reason Three: The centrifugal oil filter bearing is damaged or needs to be lubricated. Solution: Replace with new bearings or oil on the bearings Wang.
Four reasons: the foundation is not solid enough to install the equipment. Solution: the foundation for reinforcement.
We FIRST company produces centrifugal oil filter press...