Oil press, oil motor turns, handle good embryo from the hopper into the pressing chamber.By squeezer to advance into the spiral, squeezing.
Oil mill main technical parameters:
1, press shaft speed: 28 to 38 points
2, the gear box ratio: 15 and 34 x 13/55 = 1:9. 59
3, with power: 7.5-11 kw
4, triangle: type B 3500-4000http://www.palmmill.com/License/31.html
5, installation dimensions: length x width x 1620 x 630 x 630
6, single weight: 650 kg
7, production capacity are shown in table (1)
Oil name Capacity (kg) per hundred kilograms every 24 hours oil dry cake residual oil rate (%)
Rapeseed hot press 30-38, 3500-4000-8-7.5
Cold pressed 28, 1800-2000-35
Peanut hot pressing 35-45, 3500-4500 7
Cold pressed 32, 1500-2000-40http://www.palmmill.com/Products/proc/81.htm
Soybean hot press 3300 10-16-3800-6.5-7
Cold pressed 8 to 14, 1700-2500
Sesame hot pressing 44, 3500-4000-47, 6.5 to 7.5
Cottonseed cold pressed 10-14, 2000-2500, 5.5 to 6.5
The working principle of the oil press
Oil motor turns, handle good embryo from the hopper into the pressing chamber.By squeezer to advance into the spiral, squeezing.Because of material embryo in oil press in the bore of the press is in motion, under the condition of pressing chamber pressure, embryo and squeezer, pressing chamber between a great deal of friction resistance.So you can make the material produces friction between, caused by relative motion.Squeezer, on the other hand,http://www.sunflowermill.com the root of the garden diameter is gradually enlargement.When press screw rotation, thread and material embryo that will move forward, can flip outward again, at the same time close to squeeze material layer on the surface of the screw thread is as pressing shaft rotation.In the bore in the extract of each embryo particles are not uniform, the same movement, but there are also relative move between particles.Squeezed oil produced by friction heat and meet the necessary to process operations on a quantity of...