Will first pot foot by softening treatment of water, protect the reservoir bales valve is closed, and then blowing in ignition, achieve the yan steam boiler pressure.6 million mpa (< 6 atmospheric pressure), and then power on the electrical control panel as the switch is closed, the control knob to "work" on the screen, then start screening machine, bucket conveyor, sheller, seed shell separator, mill and other equipment, raw materials and the feeding, transportation, cleaning, shell separation to rolling stock, if the boiler pressure.6000000 mpa, i.e., open the valve on the gas storage bag and steam for the machine, which under the pan yan steam valve. Yan for machine preheating.When steaming for machine pressure of each pot reaches 0500000 mpa (see pan pressure gauge), palm oil mill,ﾧ to push for yan on the start button, then after mill screw conveyor, http://www.palmmill.com/News/107.htmlsteamed for machine will run at the same time. Billet by screw conveyor sent to yan for the machine in the pan, at the same time, will be steaming pot gush steam valve opening on billet, steamed billet after about 30 minutes. Will the pot on the lateral positioning screw down to locate in the screw hole on the top, on the pot bottom of the pot material door open, making steamed come into the pot billet, the 20-30 minutes, will be in the same way in the pot pot material door open, keep blank into the pot to fry.Meanwhile, put oil on the start button press, no-load operation of the refined oil equipment, setting up a squeeze.When the pot billet moisture content and temperature are reaching into the press, open the pot discharging door, make blank into the refined oil press equipment.Shake machine, oil refining pot synfuels fiasco separate operation and operation, can according to need to stop.
If refined oil equipment can't eat in front of the billet, can press filter combination on the stop button, make the dial feeder, bucket elevator, screening), sheller, seed shell...