Oil refined oil equipment use and operation method

Oil refined oil equipment use and operation method

  • Submitted By: wJulie
  • Date Submitted: 09/03/2014 8:11 PM
  • Category: Book Reports
  • Words: 732
  • Page: 3
  • Views: 1

(l) of edible oil refined oil equipment preparation before driving
1) check the transmission oil refined oil equipment oil level height, and other edible oil refined oil equipment lubrication part carefully check, good edible oil refined oil equipment lubricating oil or grease.
(2) to ensure that the cooking oil refined oil equipment squeezed inside the chamber without any leakage into the iron impurity hard objects.To do this, can try to offer big rotating drive shaft oil refined oil equipment v-belt pulley for several circles, pay attention to oil press and oil refined oil equipment transmission inside have no sound.
(3) check the firmness of edible oil refined oil equipment belt
(4) check the cooking oil, refined oil equipment to find out whether the pie mouth relax the clamping nut loosen, toggle cooking oil, refined oil equipment adjusting bolt use head pressure to produce bread circle, and then reverse back to four laps, use pie mouth set aside sufficient clearance, and then with the clamping nut.
(2) to start, before the official start of the cooking oil refined oil equipment motor oil to start the motor oil refined oil equipment, let palm oil plant (http://www.palmmill.com) run idle for 15 minutes. Check whether the no-load current is in the normal range (7. 5 kw motor three phase current is around 5 amp), and observe the different parts work is normal.If you have fever or abnormal sound. To stop in time oil press.
(3) cooking oil refined oil driving device
1) everything is normal, after beginning. Grinding feed, improve oil refined oil equipment pressing chamber temperature to the required value (about 90 'C above).When cooking oil refined oil equipment to squeeze that just opened.Can't is too hard.
(2) as cooking oil, refined oil equipment machine overflow increased feed feed rate can be added to the normal output level gradually.At the same time, throw the regulating handle, adjust the cake thickness, until after the normal oil, use the...

Similar Essays