Raymond mill and kaolin processing
The kaolin ore value is not high, the industry is the basic raw mill grinding through deep processing after the sale. The processing of kaolin used is the largest industrial Raymond mill, the kaolin ore grinding to 100 mesh, 200 mesh, 325 mesh, 400 mesh, 500 mesh, 600 mesh, 800 mesh, 1200 mesh, 2500 mesh and other specifications, and then supplied to the paper mill and ceramic factory, can be used to produce light weight coated paper, coated paper and coated paperboard and floor tiles, sanitary ware, ceramic products.
General kaolin is content of silicon content than that of aluminum, silicon content is about 52%, the aluminum content is about 42%. And both in more than 95. For most applications, silicon and aluminum to maintain this ratio is best, but in the ceramic and porcelain application, high aluminum content requirements better, reaching more than 44% for the best. From the industry as a whole, fineness of Raymond mill processing out more, economic value is higher also. Whiteness of 85% or more, the kaolin powder fineness of 1250 mesh factory tax inclusive price is in 1000 yuan of above, considerable economic benefit.
The current conventional processing below 400 mesh kaolin powder equipment mill equipment currently producing is Raymond mill, the mill can be processed into 80-400 mesh kaolin ore products with different specifications, Raymond mill equipment is mature and reliable technology, simple in process, finished product specifications complete standard, has been fairly good the use effect of the kaolin powder processing.
Jaw crusher lubricating device
Jaw crusher Lubricating system for lubricating oil injection lubrication points convenient mechanism, an eccentric shaft bearing usually uses the centralism lubrication. The Jaw crusher support surface of the mandrel and thrust plate is generally adopted by manual grease lubricating grease. The movable Jaw crusher jaw swing angle is small, the shaft and the...