Screw press crushing soybeans often arise

Screw press crushing soybeans often arise

Screw press crushing soybeans often arise: when the use of screw press virgin soybean oil, improper operation or superior fuel moisture content should not regulate, there will be a different problem.
1, when the phenomenon of slag run press, screw press,soybean oil press machine (http://www.soybeanpress.com) at the time, if a small amount of oil residue run phenomenon. If you run a large amount of slag, it needs to be adjusted. From the perspective of oil, fuel moisture content inappropriate, too dry or too wet, slag run phenomenon occurs, the oil is too wet bar row run slag into a sheet cake to teach the soft hand grip into a slug flow in the oil white foam. If the oil is too dry, powdery residue strip running row, whitish powder into a cake, poor flow of oil, which was mushy.
From the press considerations: Soy contains belong to the lower amount of oil, the oil inside the gap should be less pressing bore. Article row should use virgin soybean strip row.
2, back when squeezing soybean oil phenomenon: the presence of oil in the hopper. For crushing soybeans, rarely return oil, because oil is a phenomenon back to squeeze a higher oil content of oil prone.
Article discharge gap is too small: use a mat gap adjustment bar row, or mounted on the bar rows 2-3.
3, the cake flow, or no bread, nor feed:
Oil press machine (http://www.jxoilpress.com/) that there is no feed and no cake phenomenon is the early use of the new machine, without adjustments, caused by improper use, when fuel moisture content should be adjusted improperly. If the problem belongs to the water, and when the new machine should be strictly in accordance with the manual operation, should slow controlled feed, stand up before the normal temperature rise above 80 degrees when the press.

Similar Essays