The main factors influencing the effect of squeeze oil

The main factors influencing the effect of squeeze oil

  • Submitted By: emmafuqian
  • Date Submitted: 09/22/2014 12:59 AM
  • Category: English
  • Words: 473
  • Page: 2
  • Views: 1

Squeeze oil effect is decided by many factors, mainly including press structure and squeezing conditions. The two aspects of in addition, oil mill structure and selection will also affect the oil to a certain extent effect. Squeeze the influence of the structure of vats material structure refers to two aspects of mechanical structure and the internal and external structure.palm oil processing plantThe structure of the pressed material properties mainly depend on the stand or fall of pretreatment, primarily steaming and frying, and the composition of the oil itself. The general requirements of press material structure. Press material particle size should be appropriate and consistent, press material inside and outside of the structure of the good consistency and press material better, less the number of complete cell press material density in does not affect the internal and external structure under the premise of the more the better. For press material oil viscosity and surface tension in the lower as far as possible, press material particles have enough plasticity.
In general, with the increase of squeeze material moisture content, its plasticity is also gradually increasing. When the water reaches a certain point, squeeze out the oil is best, when the moisture content is referred to as "the optimal moisture" or critical moisture. For a certain press material, under certain conditions, the optimal water has a relatively narrow range. draught fanOf course, the optimum moisture content range and other factors at the same time, the first is the temperature, protein denaturation degree are closely related. Factors influencing the press material structural properties. In many press structure properties of squeeze material mechanical properties, especially the plasticity of squeeze oil effect is the largest. Squeeze in oil, other conditions including shell and roughly the same case, its plasticity is mainly affected by moisture, temperature and the influence of...

Similar Essays