Crusher is from the rack, spindle , suspension , linings, Drives and eccentric bushings, adjust the main components device safety device , etc., and then Zhengzhou Yifan Machinery to introduce you to the seven zero cone crusher part Details constitution .
Rack is generally cast steel , in order to facilitate easy transportation manufacturing , according to the crusher size grid rack into 2-4 layers , separated by screws , rack for large crushers , but also can be made into two halves , then the positioning pin , and screw fastening .
The main spindle is part of the crusher , generally structural steel with a No. 35-50 large crusher can be steel, which is mainly exposed to the crushing force produced by the bending moment on the beam axis through the upper conical hanging nut , small portion of the movable funnel pressed together , while the lower insert hole of the eccentric sleeve germanium .
Suspension must meet crusher Swing movement requirements.
Liner moving cone and fixed cone , and that is part of the direct contact with the ore , the wear is very fast , so are high manganese steel manufacturing . Soft material for crushing small crusher, which can also be used liner is also equipped with a cast iron cone moving between chilled cast iron , moving cone and spindle liner , in order to move the cone and liner
Tightly, should be between the two casting layer of zinc or cement . Steel plate between the cone and the middle frame , the same should also filled with zinc or cement casting . Small cone crusher liner set , often made whole.
Drives all types of cone crusher , are from the horizontal shaft , small bevel gears and fixed eccentric sleeve composed of a large bevel gear .
Liner moving cone and fixed cone cone crusher , its use for a period of six months to two years. When the liner wear will increase its mine discharge port , and therefore its particle size increases.
Cone crusher safety device , mainly linked by the connection details and...