Development and Efficiency Improvement of Ball Mill

Development and Efficiency Improvement of Ball Mill

  • Submitted By: dongfang
  • Date Submitted: 03/13/2014 8:46 PM
  • Category: Business
  • Words: 344
  • Page: 2

1) Ensure appropriate rotation speed of the drum
If the speed is slow, the centrifugal force will be small, friction also will be small, Stone Crusher Machine Manufacturer In Indiagrinding body cannot rise with tube wall, also is impossible to do lifting and throwing movement. On the contrary, if the speed is fast, centrifugal force will be big, friction also will be big,Small Scale Stone Grinding Equipment grinding body clings with tube body wall, also cannot do lifting and throwing movement. Without lifting and throwing movement, grinding body will not do collision on raw materials, and only grinding will reduce efficiency, so the over slow or fast speed of tube body is not desirable.
2) Select suitable internal linings and grinding media
Lining has two roles, on the one hand, protects the cylinder from being worn, on the other hand, and prevents material to contact with the iron to avoid pollution. In general, more wear-resistant can be selected as ball mill liners, to guarantee durability. In order to increase the effective volume, on the premise of the same formula and feeding amount, you should choose grinding media with reasonable ratio, high density, high hardness, Cement Clinker Grinding Plantto reduce grinding time, while reduce the rate of wear of the grinding media.
3) Make the appropriate proportion of materials, balls and water
Loading capacity of the grinding media has a major impact on the efficiency improvement of ball mill. If the loading capacity is too small, materials impacts and grinding will be small, while excessive load reduces feeding, grinding interaction will be increased. The proportion of material and water should be appropriate, eventually see the water rate of mud and liquidity to set water yield. In general, the appropriate proportion of materials, balls and water should be 1:18:6, but total volume after mixing material, ball and water should be about 90% of the effective volume. In addition, you can also adjust the formula,...

Similar Essays