ROCKER C PARTS I WANT carlini T-bars with a 7" rise,
http://www.debrixcycles.com
12" Fatty Z Bars, SKU# 25-0753
Internal Throttle w/return spring, SKU# 36-0575
http://www.demonscycle.com
Tribal Flames shift rod (Standard length)
Tribal Flames forward controls Heavy breather? Spike breather? Hypercharger? Different seat? http://www.xoprodox.com
Chrome Spike Grips Flames XL, 2-left for internal throttle
Ebay Seller – bandwagoncycle Wild 1 Inc - www.wild1inc.com
Softail Lowering kit, W0201
http://www.alloyart.com
Single 3D Risers, RA-3 NOTEs:
Bars have been modified to fit risers. The spacing between the bars is wider then the riser so to make them work properly the bars have been cut under the riser clamps and tig welded back together.
Diamonback Rear Brake Cable is for the new controls with a side port. Stock controls will need a different part number as the port is in the front. You will also have to drill and tap a hole to mount new junction block with pressure switch and rewire switch at its new location.
Hand controls only have 2 switches which I used as my left/right turn sigs, Horn and Start. High beam/Low beam and Run/Stop switches have been rewired to micro switches located above grenade(key). Also new controls have no place for brake dip switch so you get no brake lights when you pull front brake (use back for lights)..... and no place for clutch saftey switch which I hardwired together (disabled).
and controls only have 2 switches which I used as my left/right turn sigs, Horn and Start. High beam/Low beam and Run/Stop switches have been rewired to micro switches located above grenade(key). Also new controls have no place for brake dip switch so you get no brake lights when you pull front brake (use back for lights)..... and no place for clutch saftey switch which I hardwired together (disabled).and controls only have 2 switches which I used as my left/right turn sigs, Horn and Start. High beam/Low beam...