James Hardie Dominated Fiber Cement Cladding Panels Market in 2020

James Hardie Dominated Fiber Cement Cladding Panels Market in 2020

James Hardie Dominated Fiber Cement Cladding Panels
Market in 2020
Date: 2016-07-06
Fiber cement siding is a building material used to cover the exterior of a building in both
commercial and domestic applications. Fiber cement is a composite material made of sand,
cement and cellulose fibers.
Fiber cement cladding Panel is a non combustible material which is widely used in high
bush fire prone areas throughout Australia .
Fiber cement cladding Panel is a very heavy product and requires two people to carry the
uncut sheets. Thin fiber cement cladding panel is fragile before installation and must be
handled carefully; it is prone to chipping and breakage if improperly handled.
Cutting fiber cement cladding sheeting usually requires a mechanised saw or metal hand
shears and sheets can be cut to size in three ways:
 Thinner sheets can be scored with a heavy duty cutting blade and snapped;
 Purpose made “fibro cutter” (an Australian term);
 Thicker and denser sheets require cutting by a mechanical saw using a diamond blade
(Masonry blade);
 1/8 spacing required between end-joints (cladding seams) later to be filled with caulking
made for fiber cement siding;
 Metal 6″x6″ step flashing required behind overlapping seams to prevent sheathing
damage from water;
 Hot dipped Galvanized roofing nails to hang fiber cement siding.
Since the construction industry development and people’s living standards improve, the
demand of fiber cement cladding panels is getting bigger, the key players on this market
are the following:

1

Read Full Report: http://www.gosreports.com/global-fiber-cement-cladding-panelsindustry-2016-market-research-report/
Joanna | Executive – International Business and partner Relations
E-mail: info@gosreports.com | Tel: 1-510-400-8520
Web: http://www.gosreports.com/


Similar Essays