Name: Toyree Nickerson
Date:
Exp 2: Laboratory Techniques & Measurements Lab Section:
Data Tables:
Step 1: Length and Measurements
Object Measured Length in cm Length in mm
Step 2: Warm Temperature Measurements
Hot tap water temperature __41__˚C
Boiling water temperature __100__˚C
Step 3: Cold Temperature Measurements
Cold tap water temperature __22__˚C
Ice water temperature __7__˚C
Step 4: Volume Measurements
Volume of half filled graduated cylinder _50___mL
Volume of completely filled small test tube __16__mL
Number of drops in 1 mL ___20_drops
Volume of the micro pipet ____ drops ____mL
Step 6: Density Measurements
Part A
Mass of empty graduated cylinder ___54.7_g
Mass of graduated cylinder and water __104.7__g
Net mass of the water _50___g
Density of the water ___2.1_ g/mL
Part B
Mass of graduated cylinder and alcohol _100.8___g
Net mass of the alcohol ___g
Density of the alcohol _.789___ g/mL
Part C
Mass of graduated cylinder and salt solution ____g
Net mass of the salt solution ____g
Density of the salt solution ____ g/mL
Part D
Volume of half filled graduated cylinder ____mL
Volume of half filled graduated cylinder and metal bolt ____mL
Volume of the metal bolt ____mL
Mass of the metal bolt ____g
Density of the metal bolt ____g/mL
Part E
Mass of half filled beaker ____g
Mass of water displaced by metal bolt ____g
Volume of the metal bolt ____cc
Density of the metal bolt ____g/cc
Mass of half filled beaker ____g
Mass of water displaced by magnet ____g
Volume of the magnet ____cc
Mass when dropping the magnet in the beaker ____g
Density of the magnet ____g/cc
Calculated volume of the magnet using dimensions
of length x width x height ____cc
Density of magnet using the calculated volume ____g/cc
Conclusion:
Questions and...