Peanut sheller debugging, operation and use

Peanut sheller debugging, operation and use

  • Submitted By: wJulie
  • Date Submitted: 10/07/2014 10:57 PM
  • Category: Biographies
  • Words: 303
  • Page: 2
  • Views: 1

Peanut sheller debugging, operation and use:
Peanut sheller is professional equipment for peanut hulling machine integrating peanut shell, shell and kernel separation, has simple structure, convenient operation, low power consumption, low noise, etc, to get rich choice of the equipment.
1, the preparation before the empty trial and matters needing attention
(1) check whether the parts assembly is correct, all parts of the joint are solid and reliable, transmission belt tensioning moderate, jump too loose will slip band, that affect the yield and quality, tight can lead to bearing temperature is too high.
(2) to start the fan switch, observation direction is correct, whether running smoothly.
(3) start the host switch, observation direction is correct, whether running smoothly, without noise, impact and vibration.
(4) run idle for 10-15 minutes, no abnormal situation, after using a sunflower oil press machine equipment (http://www.sunflowermill.com) wrench, tighten all bolts of rotating mechanism may release work be carried out.
2, operation and use of peanut sheller
(1) before feeding, ready to absorb iron, stone and other impurities removal, then choose the suitable shell grid shell, which can increase production, reduce the breakage rate.
(2) feeding work, should guarantee the material evenly, not more and less, or cleaning the warehouse stock is not easy to grasp, affect the quality of red rice.
(3) grasp the kernel recycle station (http://www.palmmill.com/Products/prod/) control switch, want right amount at the time of the kernel, such as cleaning inside the warehouse material should be quick to put more, less is slowed down, keep the warehouse material thickness within 5 to 8 cm.
(4) need downtime, should first stop feeding 3-5 minutes, let cleaning warehouse material in empty and then stop.If the downtime, when turned on again, should first open a cleaner, to open the fan, running after feeding.

Similar Essays