Tasteful and glamorous press equipment, press operation in the process, due to the operation also enables greater degree of wear of consumable press to press as an example, in the oil extraction machine experiments showed that the proportion caused by wear and tear of wearing parts in the press to start the process very large.
Wear wearing parts are 80-85% occurred during startup press, there are 15-20% occurred in the process of stopping the press, indicating that the process of press operations should strictly in accordance with the rules and operations of oil press machine, which is very important.
During operation of the press, some impurities clean up oil crops to generate bad press will shine wearing parts, in the case of the oil press oil crops, which will contain impurities, especially those containing inorganic impurities, this wear and tear on the press wearing parts is relatively large.
Another case has been operating in the oilseed press shell oil crops such content is too high, it will be according to press consumables accelerated wear, if press juice also fell into a small metal cage this situation consumable wear press worst, so where the operation is necessary to be careful not to let the press fell into a small metal cage virgin.
Now press more perfect in structure, but still a little shortcomings, such as small oil press pressing screw shaft on the machine since the shift, as well as the former stands to disengage, which requires the press service operator in this aspect should be more careful, must take the press fastening nut tightened after the press service, in the press service, press to be careful to manage the machine and repair these problems can be eliminated. More advice welcome visit