4, Stop feeding before turn off the machine, the cone crusher can be shut down until the broken material completely empty out from the crushing chamber.
Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:grinding mill,mini crusher,We will provide you with the best product and service.
5, While in use, immediately turn off the motor if the crushing cavity was blocked with materials.You can restart it after the materials are all discharged.
6, Use another end of the cone crusher plate if it is worn.
(D) The lubrication of cone crusher
1, Check regular the lubrication of the friction surfaces and smooth operations regularly, ensuing the proper functioning and longer service life of the machine.
2, The grease using for this cone crusher should be decided according to the environment, temperature and other conditions, generally calcium, sodium or calcium sodium based grease can be used.
3, The adding grease volume is about 40-70%. It must be replaced every three months and the bearing and bearing plate should be cleaned with clean gasoline or kerosene.
4 roller mill supplier small stone crusher, Grease must be added to the junction between the elbow board and ancon plate prior to start.
mini crusher:http://www.daswellmining.com/en/PRODUCTS/Mini_Diesel_Crusher/41.html
small stone crusher:http://www.smalldieselcrusher.com/small-roller-crusher.html
roller mill:http://www.daswellmining.com/
roller mill supplier:http://www.daswellmining.com/en/PRODUCTS/High_productivity_Roller_Mill/87.html
grinding mill:http://www.daswellmining.com/en/PRODUCTS/Mill_equipment/24.html(A) Preparations before the starting of the cone crusher.
Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery...