Hydraulic oil vendors would forrest mention of refined oil equipment to wake when using the following points should be paid attention to
A, hydraulic oil vendors would forrest reminder: before the use of refined oil equipment, first of all should be ready for all equipment and containers, check and adjust
The belt tightness of refined oil equipment, and then start the motor oil refined oil equipment, make cooking oil refined oil equipment machine idle running about 15 min,
Check the hydraulic oil press squeezer shaft speed.General speed should be around 33 dmin.When cooking oil refined oil equipment idle must observe the gear box
palm oil refinery plant
Gear meshing and the voice is normal, and the bearing parts of edible oil refined oil equipment and motor is normal, refined oil equipment oil refining
Idle equipment, the motor current of refined oil equipment should be around 3 a, such as over current is too high, shall be immediately stopped refined oil equipment inspection, adjust the refining
If oil equipment.
Second, the hydraulic oil vendors would forrest remind: after cooking oil refined oil equipment no-load running normally, the original ready to edible oil refining
Material, ready to put into the hopper.It is important to note that is at the beginning of edible oil refining squeezing, feed temporarily cannot too fast, or you will be
Chance to squeeze the pressure in the chamber is suddenly increases, and the refined oil equipment squeezer shaft turns motionless, block, refined oil equipment pressing chamber may even produce the refining
The possibility of oil equipment pressing cage broke down, causing major accidents may occur.So here the hydraulic oil vendors would remind forrest equipment co., LTD
: to start cooking oil refining squeezing, must feed evenly slowly into the raw material into the hopper, make the running-in oil refining equipment.So the
After several times, last a period of...