Currently saving energy has become an important condition for the construction of a conservation-oriented society, the creation of a harmonious society. We are no longer limited to how to improve the efficiency of the dryer drying problems, on this basis, we have taken into account how to improve the utilization of materials to minimize pollution of the environment and reduce energy consumption. Only the wet fly ash at reasonable energy consumption, simple process for drying, so the water is low, turning waste into treasure to achieve social and economic benefits of the double harvest.
Then we go through trial and error, fly ash dryer needs to be done to improve the three o'clock. First, to improve feeding into the device, the current commonly used feed equipment are optional cutting downpipe, usually settle in the upper furnace jubilation, this is very simple cutting downpipe be burned, replaced frequently, adding the number of points the furnace, resulting in many equipment manufacturers to reduce the use of work-rate, improve skills removed after cutting downpipe, conducted in the vicinity of the dryer cylinder welded hopper openings, according to the hopper feed rate to determine how much the number and size, made out of a sealed cover, so that both cutting downpipe damage dealt doubt, fly together over the barrel near the feed, play even shed doubt, create the conditions for constituting material curtain. Secondly, the lifting plate to improve the drying flip back and forth to let the fly ash was added at a residence time inside the dryer added compositions X-type dryer lifting plate in the middle region, so that near the lifting plate scattered X-type material and then through the middle of lifting equipment material constituting the secondary spread, so changing the status of a lifting parabolic form repeatedly spread materials, internships and exchanges constitute a material dryer section of a simple curtain, extending hot air and fly ash touch...