Here are some tips about prolonging service life of fixed mortar mixer:
stationary concrete batching plant,SICOMA concrete mixer,Commercial Concrete Batching Plants,
Many concrete mixer users may know that during concrete production, they need spread small amount of engine oil on the rotating gear and lubricate chain.
In addition, after using fixed mortar mixer for 300 hours, users need clean the chain. Every week, users should open the cover pieces of each running chain. After using mortar mixer, please remember to discharge the materials in the mixing drum and clean the drum using water. Then cut off the general power supply concrete batching mixing plant price, check the mixing arms and mixing blades and other parts in the concrete mixer. Timely fasten the bolts and nuts when find they are becoming loose.
The service life of fixed mortar mixer is closely connected with maintenance. And it is also connected with replacement and maintenance of fittings of concrete mixer.
(1) Regularly replace the lub oil of reducer according to the stipulation;
(2) Often check fixing bolts of each part, especially the lampstand of concrete mixer machine SICOMA Twin-Shaft Concrete Mixers concrete mixer manufacturer, motor base, blades and the lining board to prevent getting loose;
(3) Inspect whether the lubricating pump of cement mixer be set up according to the procedures and be operated normally;
(4) After using mortar mixer, clean up mixing barrel, mixing blades and mixing shaft;
(5) In freezing season, after using concrete mixer, users shall discharge the water in water pump and water pipe;
SICOMA concrete mixer:http://www.beton-mixer.com/products/concrete-mixer/sicoma-mao-twin-shaft-concrete-mixer.html
SICOMA Twin-Shaft Concrete Mixers:http://www.beton-mixer.com/products/concrete-mixer/sicoma-meo-twin-shaft-concrete-mixer.html