My penguin mechanical oil factory original ZTZ essence oil refining equipment, in order to reduce the production cost, expand the scale of processing, improve the capacity (single output increased from 10 t/d to 45 t/d),
Increase enterprise economic benefits, mechanical oil vendors would I penguins will use two standardized ZTZ spare and accessory parts with good performance of refined oil equipment manufacturers, please technical personnel for the same type
Pre-press expeller ZTZ, now will introduce transformation situation.
1. The equipment modification
In transforming a process, ZTZ gearbox of refined oil equipment, auxiliary part no change, fry pan to extract cage, screw axis, the school cake institution changes, replace the former
Wallboard, feeding on the tee, squeezer spindle and the spindle parts: section 7 squeezer, 7 day lining, light socket, school cake head, school cake after the first paragraph, washer, split ring, school pie plate
, trapezoidal thread sleeve, trapezoidal thread round nut, the circle in cake, pressure shaft and the shaft complete sets of parts, pressing cage part, replace the corresponding pulley.Raw materials processing capacity by the original
To increase of 10 t/d to 45 t/d, production cost greatly decreased, obviously improve the economic benefit.
2 equipment used in the process of further perfect
Pre-press expeller modified in use after a period of time, the first section of the pressing bar often fracture, and feed the 3-way two wear is very serious in contact with the press cage, often change
Feed tee, increase the costs of production, production cannot be continued, after much careful observation analysis: before and after the palm oil mill (http://www.palmmill.com) wallboard feed tee edges with the circle in cake
Spacing of 1 040 mm, and the length of the press cage for 1 '035 mm, inside the wall of the effective distance is greater than the press cage, oil mill screw spindle in operation, squeeze and a cage