Vacuum filter oil machine common failures and troubleshooting methods
Efficient vacuum filter oil machine, also called the vacuum filters oil machine, is a kind of for various oil filter material to filter purification treatment equipment, it is for the protection of oil, improving the quality of the oil, to safety fill oil tank has a very important role.palm oil processing plant
Vacuum filter oil machine used frequently, the hard to avoid in the process of using all kinds of problems, in this paper, some of the common failure types are classified and refined, convenient for users to make their own judgment and processing.
Fault phenomenon: 1, filter oil machine vacuum does not meet technical standards
Reason 1) filtered oil water cut too much, eliminate the gas water vapor.
Methods (1) normal phenomenon, need many times on the oil filter, improve the oil temperature, evaporation of water vapour.
Reason (2) might be to use regional higher, affect the vacuum non-standard pressure changes.Processing method (2) increase the vacuum pump.
(3) low vacuum oil vacuum pump oil level line.(3) supplement or replace the oil processing method.
(4) joint leakage causes, vacuum pump wear parts.(4) maintenance, replacement of parts processing method.
Fault phenomenon: 2 filter oil machine in normal working under pressure is greater than 0.3 Mpa.
Because (1) machine flowline is longer, transmission oil level is too high, the oil tube diameter small or too small, which causes the difficulty in oil absorption.Methods (1) change the tubing length, set up a more reasonable tubing or replaced.draught fan
Reason 2. Oil suction filter to too many impurities, which causes the difficulty in oil absorption.Filter element is the core of the filter oil machine work, long time use will lead to filter impurities gathered inside, oil suction filter clogging can lead to pressure.Processing method (2) replacement cartridge filters, cleaning filter shell.
Fault phenomenon: 3 vacuum...