Mine equipment are large-scale equipment, in the process a little carelessness may cause safety accidents, therefore, in the operation of mining equipment especially crusher equipment has many aspects we need to pay special attention to. In the following we explain to everybody what to do in the crusher equipment before the start and shutdown.
Must be the following matters before starting the crusher machine:
1, inspection and examination of the condition of the crusher machine;
2, check the lubrication device and tubing effect;
3, check the feed and control equipment and instrumentation;
4, check the role of starting equipment;
5, check the belt, the chain of circumstances;
6, check whether the safety protection device and its status;
7, check the crusher machine all parts function;
8, check and remove the foreign materials in the machine, in order to prevent the crusher machine starting;
After work, must carry on the following matters:
1, cleaning and cleaning crusher machine;
2, check the crusher machine parts;
3, check and correction lubrication device and tubing necessary role;
4, check the bolt connection, wedge connection, retaining ring, a bolt, nut, wipe washers, cotter pins, not suitable for replacement;
5, check the belt, chain and connection, remove abnormal phenomenon.
A good beginning is half the success, only serious and stick to note these before the start and after shutdown, to ensure normal production safety operation of equipment. Also remind you, insist on doing these things, can effectively prolong the service life of crushing machine.
if you want know more about it ,please visit my website: