New designed oil press equipment
oil press machinery
1. High oil yield, low oil residual in cake. The oil left in cake is less than 6% ; the cake thickness can be adjusted when machine stops running;
2. Small-land using: only 10-20 square meters workshop can make production.
3. Pure oil quality: machine surface is made of chrome plated stainless steel, in line with food hygiene standards; Besides, with two vacuum oil filters, residual can be removed by simple filtering;
4. Other advantages: high efficiency, energy and labor saving, easy operation, simple maintenience .
Operation Process of oil press equipment
1. Prepare raw materials
2. Adjust the machine, for example, checking electricity, beginning heating (if it is cold pressing, heating is not needed.)
3. Open the machine, put seeds into the flow box.
4. Seeds flow into the screw bolt, the pressing begins.
5. The crude oil is out of the squeezing bolt, flowing through the board into the vacuum filter for filtration
6. The oil flow out from the bottom of pipe and the pressing is finished.
Operating principle of multifunctional screw oil press:
1.When cotton pressing machines is on working, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under hightemperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturingbecause of helping protein change...