Peanut oil press pretreatment process requirements: oil press material embryo involved before, must undergo pretreatment process, pretreatment quality will directly affect the normal work and spiral oil press.Different oil have different pretreatment process, but mainly include the following items:
1. Clean up.Enters the oil contains some impurities (sand, gravel, iron filings, etc.), if not careful cleaning, can accelerate the oil press internal parts wear and tear,palm oil processing plant lower yield efficiency, even breakdowns and accidents.Its form a complete set of equipment are: cleaning sieve, removing stone machine, magnetic separator, etc.
2. Shell.For shell oil, to squeeze after your shell, it can improve the productivity and yield efficiency.Its form a complete set of equipment are: sheller, separating screen, separator, etc.
3. Broken.Monolith some grease to the press, but after crushing, flaking squeeze again, can obviously improve the yield efficiency.Its form a complete set of equipment are: crusher, rolling machine, etc.
4. Steaming and frying.Steaming and frying is an important link in improving yield efficiency, the commonly used method is oil wetting first, and then through frying pan dry, make the oil meet the process requirements involved moisture and temperature, and its form a complete set of equipment are: steaming, frying pan, fry seed pot.
A. High efficiency and energy saving "ordinary oil raw material machining 50 kilograms of 13 kw motor 1 hours, peanut oil raw material machining 50 kilograms, just 5 minutes 3 kw motor power consumption, efficiency improve several times, save electricity above 90%. Appreciation: ordinary oil press material after rolling press, by-products can only be as animal feed, peanut oil pressdraught fan
2. After processing, such as every one hundred jins of peanut oil extract, 28-35 kg, restorable peanuts can also be processed into high protein, low fat green food, such as processing and spicy peanut,...