Large scale equipment crusher as modern mines, construction and other areas are very common, loss of questions about its nature has been widespread attention. Today Xiaobian take you to learn more about how to reduce the crusher in loss of the use of process, so that the efficiency of the crusher work at the same time longer life higher.
1. special plane
In the middle of the actual use of crusher machine, we should do first is to use different choice of special machines the most suitable for the use of. Avoid by all means during the process of mixed use, so it is easy to reduce the energy consumption of life itself but also increase. For example, in the mining operation in intermediate usually use the jaw crusher machine(http://www.crushermachinedisk.net/) for crushing work, but if the choice of other species or that the ore and stone mixture of broken words so that it is very easy to make the machine increases the loss in the use process, and can greatly shorten the machine life.
2, the use of Science
In the middle of the process, we must follow the scientific principle, control parameters and using the rules with the machine to use. There is a very important matters here to share with you, the degree of filling that is material and filling uniformity. The cone crusher machine for example, in the middle of the process is generally required to fill material to a little more than half can play the performance and efficiency of the largest. And raw material must put more uniform. Strictly abide by the principles of efficiency would enable a machine using the higher energy consumption, loss and machine and the resulting smaller. Otherwise it is instead reduces work efficiency but also increase energy consumption and loss.
Therefore, we must use and performance of the product itself as well as the use of methods to have a comprehensive understanding before using the machine, so as not to make mistakes in the use of intermediate process.