What about Configuration Design of Vibratory Feeder?

What about Configuration Design of Vibratory Feeder?

  • Submitted By: danny231
  • Date Submitted: 08/14/2014 11:43 PM
  • Category: Business
  • Words: 360
  • Page: 2

Vibrating feeder is also called the vibratory feeder, Hongxing machienry vibrating feeder is made vibration motor as vibration source, ensure the equipment to withstand the impact of the large materials falling, feeding ability is greatly increased, for large materials before rough crusher.they uniform supply, can make use of the rods or plates on the surface of the mesh at the same time, achieve the function of the preliminary screening, so as to get rid of dirt and fine grained material;In the process of sand and stone production process can be massive, granular materials from storage bin evenly, timing, and continuously give into the device, thereby preventing the machine caused by uneven feed of the phenomenon of crash, prolong the service life of equipment.

Vibrating grizzly feeder can be divided into steel structure and grate structure, steel structure of the feeder is used in the application of stone production line, the more will the material evenly into all broken equipment; Grate structure of the vibrating grizzly feeder can be coarse screening for material, make the system more economic and reasonable on the preparation, is indispensable in crushing screening equipment. Vibrating grizzly feeder used in metallurgy, coal mining, ore dressing, building materials, chemical, abrasive and other industries crushing, screening combination equipment operation.

According to equipment performance requirements, configuration design should try to reduce the material to the pressure of the tub, according to the requirements of factory, warehouse material effective PaiKou shall not be more than a quarter of the groove width, material flow control in 6 to 18 m/min. To quantificationally the larger material, at the bottom of the bin discharge Should be set high enough block board;For not affect the performance of the feeder, block board shall not be fixed in the tub. To make bin discharge smoothly, silo wall Angle after the best design for 55-65 degrees....

Similar Essays